PCHC63A Series

Features

• Magnetically shielded construction
• High saturation current up to 9.5Amps
• Expanded operating temp range
• Low DC Resistance
• Suitable for pick and place

Electrical

• Inductance Range: 1µH to 22µH
  Additonal values available
• Tolerance: 20% over entire range
  Available in tighter tolerances
• Test Frequency: As shown.
• Operating Temp: -55ºC ~ +125ºC
• Storage Temp: -55ºC ~ +125ºC
• Temp. Rise: ∆=40ºC Typical at heat rated current.
• Under no condition should the temperature of the part exceed 125ºC.
• Inductance drop: 30% typical at rated Isat

Resistance to Soldering Heat

• Pre-heat 150ºC, 1 minute.
• Solder Composition: Sn/Ag3.0/Cu0.5
• Solder Temp: 260ºC ± 5ºC
• Immersion Time: 10 ± 1sec

Test Equipment

• (L): HP 4284A LCR meter or equivalent
• (DCR): CH16502, Agilent 33420A Micro-Ohm meter
• (IDC): 3260B WK & DC Bias 3265B WK

Physical

• Packaging: 1000 pieces per 13 inch reel.
• Marking: EIA Inductance Code